The
LED
- Light Emitting Diode:
The LED is similar to a
transistor in that it is a solid state device. We deliver, Standard LED
Tubes, with "through the hole" LED lights and today's new high quality SMD LED
Tubes, these square chip driver mounted LED lights produce higher output.
The SMD LED will operate 100,000
hours before dropping below 75% of initial production, Fluorescent tubes loose
20% of productivity after the initial burn-in period. SMD LED's now
provide a 120 degree angle of light dispersion, a recent breakthrough, which
means they are less focused and spreads the light similarly to an incandescent
bulb. While well dispersed the light is directional, unlike conventional
lighting, which adds 46% more useable Lumens.
It has been reported
for some time now that LED lighting could not produce the luminance per Watt of
compact fluorescent lamps, although true in the past, now this is not so.
For less power LED lighting is now capable of bettering the output of compact
fluorescent lamps and halogen lamps, they outperform T-8 and T-5 fluorescent
lamps.
T-8 LED Tube
applications:
Hotels Conference/meeting rooms, Factories offices, Commercial complexes,
Residential/institution, Underground parking area, Icebox Showcase, Schools,
Colleges & Universities Hospitals Places where energy saving and high color
rendering index lighting are needed ."
T-8 LED Tubes are an
Ideal for Fluorescent replacement and have many advantages over Fluorescent
Tubes. LED based light source, Environmentally friendly, longer
life than with Fluorescent Tubes with a minimum of 4 years.
• 75% Energy-saving over
Fluorescent Tubes
• Solid State Lighting, High Shock/Vibration Resistant
• Work with ballast or without ballast, 15Watt additional savings, per
fixture, when bi-passed.
• No RF Interference
• No Flickering
• Instant Soft-start
• Minimum Maintenance Costs, no ballast replacement.
• Produce Little Heat
• No Mercury and other Hazardous Materials, fully RoHS-Compliant
• Continuous Operation for White LEDs
• Rated to Operate from -40°F to 122°F [-40°C to 50°C], Perfect for
Environs with Extreme Climates.
• Color Temperature:
Commercial White 4000 K-4500 K, Pure White 6000K-6500K
• Tube Diameter: 26cm
Today's advanced LED
products will not only pay for themselves in energy savings over their very long
lives, but, commercially will repay in multiples on labor saved replacing lamps
in tall spaces, an LED T-8 fluorescent replacement tube will save between 5 and
10 incidents of outages and the replacement costs of fluorescent lamps, not to
mention the expense of occasional ballast replacements.
In our humble
opinion the White LED lamps sharpen contrasts, brighten colors and makes
displays and the reading of printed materials clearer and easier on the eyes.
Environmentally
friendly, energy efficient, no heavy metals or mercury are used in the
production of LED lighting, so none will end up in the landfills, rivers,
oceans, animals and people from this source.
You will no longer
experience the mind and eye exhausting, mood numbing, buzzing and flickering
caused by the Ballasts. Prior to the initial installation of a LED
Florescent replacement lamp make sure to disconnect and bypass the the Ballast
and Starter, the lamps will last much longer, and use the least
energy.
Types of
LED
Lighting
Today there are
LED Plug & Play
products that can replace virtually any type of general bulb or lamp, commercial lighting products like,
spot and flood lights, track lights, down
lights, side lights, electronic displays, remote controlled, motion activated,
recessed can, in-ground, color washers, street and parking lot lighting, solar powered and
more.
We are not currently cataloging all these options here, but, you are
welcome to
Contact Us with any special requests
for any of these types of products.
We are initially focusing on
T-8 Fluorescent Replacement
Tubes,
MR-16 Spots, and
Grow Lighting.
On this site we have
selected products that we think will gain wider acceptance, and do more good,
sooner.
